The Next Level

I have to confess . . .   When I figured out the number of steps in the castle a couple of weeks ago I said 25 steps by 5 floors, that's 100 steps.  I hope it doesn't take you as long as it did me to realise how very terribly wrong that little bit of simple mathematics is.  There are, of course, actually 125 steps.  At least I can be certain when I tell you the castle now has double the floors it had last week.

At least I seem to have managed to get the measurements right in building the castle, at least so far as the next floor sits on the basement and matches up with level of the door opening on the stair tower.

One mistake I did make was to put an arched ceiling in the basement dungeon.  I used toothpicks to make bars to secure the dungeon, but continuing the bars up to a curved ceiling and having them fit properly is not easy.  So at the moment anyone wanting to escape the dungeon only has to climb over the top of the bars.  In future I will have another go at sealing off this escape route either with bars or a solid piece of wall.

Above the dungeons are the castle kitchens.  The floors are tiled with pieces of orange EVA foam cut into squares and glued in place.  This was given a wash of brown paint to create a more terracotta tone and 'grouted' with a mix of pollyfiller, water and grey paint.  Under the arch on the left side of the room is an area separate to the kitchen that will probably a scullery or buttery.  The right side of the kitchen is where the kitchen proper will be.  The opening in the back wall is for the ovens.

On the opposite side of the castle I used a door kit from Petite Properties to add a door to the wall dividing the well room from the alchemists lair.  The door itself is quite effective but when you see it against one of the doorway arches I cut you'll notice it looks very short.  It looks even worse against a 48th sized person.

Working to scale, a 48th (1/4") person the equivalent of 6' tall should be about 1 1/2" tall, therefore a doorway should logically be at least that high too, preferably a little higher.  Yet the professionally made to scale door is no more than 1 1/4" high.  Set against my admittedly generous arches, this door really looks wrong.  Worse, I have five more of these doors to use higher up in the castle and they're all going to look silly too.  Up until now I've loved everything I've bought from Petite Properties but it seems items they sell as 48th scale aren't all quite 48th scale.

Above this dwarf door is a pretty swanky room with a smart red and black tiled floor and linenfold panelling look walls.  Like the kitchen, the floor tiles are cut from EVA foam, but this time laid closely enough not to need grout in a smart diamond pattern.  The panelling is just printed paper as is the fire surround and brick backing.  The wall on the right of the room is where the castle's front door will be located, making this room the castle's entry hall.  It will also be the armoury with displays of weaponry and seating for newly arrived guests waiting to be shown further into the castle.

Christmas Came Early

Last week the wonderful Lorraine of Fairy Meadow Miniatures sent me a message to let me know she was sending me a surprise.  I was thinking it was so generous of her to send maybe one or two small items.  Then the delivery guy showed up with this:

Once I'd picked my eyeballs up off the floor I opened up this massive parcel to find two boxes absolutely stuffed with wonderful things!

There were kits for all kinds of furniture and embroidered cushions, rugs, all maner of furniture (including the kitchen sink!) and so many little accessories.  There was a set of brass scales (of which Piers the Apothecary has been in dire need).  There were plates of food and ceramic jugs.  Even a wired outdoor light.  Every time I thought there couldn't possibly be anything else squeezed into the boxes something else new and exciting emerged.  There was probably enough in those boxes to furnish and accessorise an entire three story house!

I can't thank Lorraine enough for this bounty of wonderful and infinately useful items.  This is absolutely the best and most appreciated present I have received, possibly ever, but certainly since the Christmas I received a Magic Moves Barbie (hey, it takes a lot to top a doll whose arms move by themselves!  And there's a thought, how come no one makes a 1 /12th scale doll you can wire into the houses electrics so that when you switch on the lights the doll will start drinking tea or flipping the pages in a book?).

Even the empty boxes were enjoyed by Charlie who sat in them and proceeded to shred the cardboard.

Included was this package of books.  I have to admit my first thought on seeing them was 'Oh no, not more books!' having made so many over the past few weeks, but it didn't take long for an idea to form. . . .

I glued the books into a crazy stack and added the victorian cookbook stand that came free with the current Dolls House and Miniature Scene magazine to create this bookstand.  The book displayed on the stand was made from a free printie glued ontop of several layers of plain paper aged with some tea and cut to size which were in turn glued onto a piece of thin leather.

The bookstand only just fits into the Library now the rest of the furniture for the room has been made.

The canopied desk sits at the end of the centre row of shelves.  It has a sloped writing surface and plenty of shelves both above and below the writing slope to store such neccesities as bottles of ink and even more books.

Another open book made in the same way as the book on the stand sits on the writing slope.  Spare scrolls, books and a crystal ball have been piled on top of the canopy above the desk.

For the back corner of the room is this wing chair made from balsa wood with bought oak legs and upholstered with blue satin.  The celestial pattern on the fabric seemed perfect for a wizard's library, I just wish I could have srunk it down so you got more of the pattern on the chair.

To help reach those high shelves there is this set of library steps.  They are again balsa wood with a staircase spindle and some small brackets.

If this chair at the front of the room looks at all familiar, that's because I stole it from the Witch Shop; there were always too many chairs in the reading room anyway and I think the chair looks much more at home in the Library.

The firebox for the fireplace has been started, but still needs work.  The back is cardboard with a thin metal scrapbook decoration and polymer clay lion's head glued ontop.  The front is formed from wire mesh between two short turned posts.

Now you've come to the end of my blog for another week, please everyone (at least those of you in Australia) go and pay a visit to Fairy Meadow Miniatures.  You may not end up overwhelmed by freebies, but you certainly won't be disappointed by the service.

. . . Every Room

It's been a busy week with changes, or at least additions, to every room of Bellerose House.

In the Second Bedroom, the previously empty dressing table has been filled with accessories.  There are a number of pots made from polymer clay last week as well as a few bottles made from crystal beads.  Cut outs from an old dolld house magazine were used to make the magazine and postcards and mail slipped into the mirror frame.

The bathroom is now almost ready to be used by the residents as it has been fully stocked with clean towels, soaps and unguents.

 The shelf unit at the back of the room has been filled with a mix of towels and bottles.  The white towels are made from pieces of felt, cut and folded to size while the green towels are pieces of carpet left over from the bedroom next door.  The bottles are again made from beads.

Over the sink a narrow shelf has been added which holds yet more bead bottles.   Soap made from polymer clay sits in a jewellery finding soap dish.

I've removed the fretwork panel that was over the loo and rearranged the brackets that supported it.  Ths resulting ledge and the top of the loo have been filled with yet more bead bottles.

The reason the tub is missing from the bathroom photos is because I'm working on putting a bather in it.  The bather is a cheap doll who has been glued into position in the tub after being hammered (literally) into pieces in order to fit.  In the tradition of all old time Hollywood movies she will be covered in lots of strategic foamy bubble bath

In the main bedroom, the furniture is still being rearranged . . . and I still haven't gotten it right.

 The dresssing table has been filled with accessories, most of which are again bottles made from beads and polymer clay pieces.

The Rec room furniture is also still moving about with the ghastly arm chairs moving out and the desk and two new side chairs coming in.  Just like the bedroom above it, the furniture is still not quite right in here.

The side chairs were made from a House of Miniatures kit which I bought many years ago at my first dolls house fair.  This was also the last time I've seen HoM kits available locally.  The desk has been accessorized with a range of items including a not-quite-finished gramaphone.

 Next door in the Sitting room, Dan has found time to take a load off and read through the newspaper.   He can't put his feet up on the coffee table anymore as that has been filled with a vase of flowers, a silver tea service and a few books left behind by a forgetful reader.

When he finishes reading he can admire the displays of collected sea shells and gemstones on the book shelf or browse for a new book to read.

Or maybe he'll just sit back and admire that emormous sideboard.

Even more details have been added to the kitchen witha new high shelf for trays and platters above the oven.

The hutch/dresser has been filled with a mix of bought canisters and crockery, polymer clay pieces, boxes made from printables and one scenic water jelly.

The housekeepers desk has been covered with papers and the shelf above filled with ledgers and mail.

The Dining room is currently the least finished looking room in the house.  I've cut a piece of fabric to use as a table cloth but after pinning it into position to drape nicely I discovered I was out of spray starch to make it stay in place.  So I haven't been able to finish the table cloth or arrange the table.

 The console table by the entry door has been adorned with an arrangement of flowers.

Beside the table sits an umbrella stand currently filled with a range of walking sticks.

 So that's it for a big week in Bellerose House with something new in every room!

Four Projects

 As scary as it may sound, there are now only five weeks left until Christmas.  Normally, I intend to create a Christmas themed scene, but am busy working on other things in the lead up to Christmas and it gets put off for another year.  Not this time around though!  I was lucky enough to find a nicely sized gift box in a local store and have started transforming it into a Christmas-y vignette using (almost) only items I already have on hand.  The wall is papered with gold and brown scrapbooking paper and the floor in green carpet.  The fretwork at the front is a room divider I bought forever ago but never used.  The fireplace came out of my box of miscellanious furniture and was repainted from mahogany to marble while the fire box within is made out of balsa wood, lace and a polymer clay lions head.  Dan is sitting on an armchair made of balsa and covered in red velveteen with a matching footstool (again made of balsa).

Here's how the tree was made:

Step One: carve a cone shape out of oasis foam.

Step Two: cut pine roping into sections about half an inch long and press into the oasis cone.

 If you're a little short on roping, don't go all the way around the tree, just do the front part where it will show.

Step Four: Use the plastic reel from an empty roll of sticky tape (or similar) to make a base by covering it in fabric and press it into the bottom of the tree.

The next step is to decorate the tree, but you'll have to wait until next week to see how I do that!

I had intended to make this scene with items I already had on hand, but decided to lash out and electrify it.  I already have some spare fireplace bulbs so I've ordered a string of lights for the tree and a lamp to go next to the chair.  I figure to hide the elcetrical connections in a big present under the tree.

Coming back to ongoing projects, my bedroom roombox window has been installed.  The window is made of strips of balsa wood glued onto a backdrop that was a free cut out in an old Dolls House and Miniature Scene magazine.  The curtains made last week frame the window.

 I'm still re-arranging all the furniture in here.  This is how it looks at the moment.  This arrangement makes room for a fireplace on the back wall and a chaise by the window.  I'm still not sure I'm entirely happy with it so by next week you might find it's been totally rearranged again.

Tilli's house hasn't been ignored either.  All the rooms now have rugs on the floor.  These were made by printing rug designs on something called "canvas paper".  It's paper that has the look and feel of fabric canvas and is designed to make printed images look like they were painted on canvas.  It's perfect for rugs as it has a woven texture and always lies flat on the floor without curling up.

Both bedrooms have had their fire surrounds installed.  A fan shaped jewllery finding was used to create a fire screen for each room.  I haven't fixed the curtains in Till's bedroom, still building up the courage to tackle that problem.

 Downstairs in the kitchen/dining/lounge room, new furniture has been added.  There are two small coffee tables, one at the end of the couch and one between the two armchairs.  A third large coffee table fills the floor infront of the fireplace.  All the tables are balsa wood tops with plastic chess men for legs.  A set of shelves by the fire was made with pieces of "Tiny Turnings" and yet more balsa.

 To help put the size of Tilli's house in perspective, here's how it looks when Dan pays a visit.

 And when he actually makes it inside:

And now for a surprise.

Last month I dressed a doll to enter in the fantasy dressing competition run by DHMS magazine.  Now that the deadline for competition entries has past, I can finally show you what I created.

I call him the "Dragon Wizard" because of his Chinese influence.  I think he turned out absolutely perfectly even if he comes dead last in the competition.

Now I just have one problem . . . . what do I do with him now?  He's been standing ontop of the CD player in my ipod dock for the past month, dangerously close to where I slosh paint and glue around and sooner or later he'll get splashed.  I need to find someplace suitable (and safe!!) for him.

Whew!  That's it for this post but come back soon as I want to get your opinion about which of two very different projects I should start to work on next!